Skip to content
EV, Generators and Power

Standby Generator Installation

When the grid fails, a standby generator starts by itself and powers the house. We size it to your loads, set the pad, wire the transfer switch and coordinate the gas and permits so it runs when you need it.

Standby Generator Installation by Electrical Illusions
  • SystemGenerator, transfer switch and fuel line
  • FuelNatural gas or propane
  • SizeMatched to your essential loads
  • ResultPower that returns by itself
What you get

What is included

  1. 1Sized to your needsWe add up the loads you want to keep running and choose a generator that handles them and the starting surge. The Generator Sizing Planner helps with a first pass.
  2. 2Automatic transferA transfer switch moves the house to the generator and back, safely and without backfeeding the grid.
  3. 3Placed to codeClearances from windows and walls, noise and drainage are planned before the pad is poured.
  4. 4Permits and gas coordinatedElectrical and gas work are permitted and inspected, and we work with your gas fitter or the utility.
How it works

From your first call to the finished job

We do electrical work in cities across the country. Find yours below and set up a visit.

  1. 1You reach outCall, text or send the form with your city and what you are adding: a car, a generator, a spa or a pump.
  2. 2We size the circuitWe read the nameplate and check your panel's capacity before we plan.
  3. 3We install to codeWire, breaker, disconnects and protection go in, permitted and inspected.
  4. 4We commission and explainThe equipment is tested under load and you learn how it works and how to keep it safe.
Good fit when

Is this the right choice for your property?

  • Homes in storm or ice areas
  • Households with medical equipment or sump pumps
  • Home offices that cannot lose power
  • Owners tired of outages
Good to know

What makes big power safe

  • Sized from the nameplateCircuits for chargers, spas, pumps and appliances come from the equipment's rating.
  • Disconnects and protectionEquipment gets the disconnect and GFCI protection the code asks for.
  • Panel checked firstWe check that the panel can carry the new load before anything is ordered.
Questions

Common questions

How big a generator do I need?

It depends on what you want to run. Many homes use eleven to twenty-two kilowatts for essentials or the whole house. The calculation uses running watts and starting surges.

Does a generator need a transfer switch?

Yes. A transfer switch keeps your house from feeding power back onto the grid, which is dangerous for utility workers, and it makes the switch automatic.

Where we work

Find your city

Type your city or neighborhood to open the page for help near you.

Start typing, for example a city name or a neighborhood.

    Ready to get the power right?

    Call or text Electrical Illusions, or send the form, and we will set up a visit. Tell us about the house or building and what you need done.

    Visit

    Let's get your power working right.

    Tell us what is happening or what you want added. We read every message and reply with clear next steps and a time for your visit.

    • Your property: where it is, how old the wiring is and what you want done
    • Your city, the job you have in mind, and any result you saved from a tool on this site
    • A visit where we look at your panel and wiring, test what we can and begin a plan around what you want
    Prefer to talk? Call or text800-224-9245

    Your estimate request

    Prefer to type? Text your request. We only use your details to respond to your request.