Skip to content
Panels and Service

Grounding and Bonding

Grounding and bonding give stray current somewhere safe to go. Old houses often have missing or corroded connections. We test them, repair them and bring them up to today's standard.

Grounding and Bonding by Electrical Illusions
  • PartsGround rods, wires, clamps and bonding jumpers
  • TestsGround resistance and continuity
  • FixesRods, clamps and pipe bonds
  • ResultA safe path for fault current
What you get

What is included

  1. 1Tested, not assumedWe test the grounding system instead of guessing, and we show you the result.
  2. 2Corroded parts replacedRusted clamps, broken wires and short rods are replaced with proper ones.
  3. 3Pipes bondedMetal water and gas piping is bonded to the system where code requires.
  4. 4DocumentedYou get a plain note on what was found and what was done.
How it works

From your first call to the finished job

We do electrical work in cities across the country. Find yours below and set up a visit.

  1. 1You reach outCall, text or send the form with your city, your panel's age and what you plan to add.
  2. 2We check the loadWe open the panel, look at the service and add up your real and planned loads.
  3. 3We plan, permit and scheduleYou get the plan, the permit is pulled and the utility shut-off is scheduled.
  4. 4We install and inspectThe work is done, labeled and inspected, and the power is restored.
Good fit when

Is this the right choice for your property?

  • Older homes with questionable grounding
  • Houses with two-prong outlets
  • Properties after a lightning strike
  • Homes with a panel upgrade underway
Good to know

What makes a panel job safe

  • Load firstA real load calculation decides the size of the panel and the service.
  • Clean and labeledWires are bundled, grounds and neutrals are right and every breaker is labeled.
  • Permitted and inspectedThe utility and the city are part of the plan, which protects you.
Questions

Common questions

Why does grounding matter?

It gives a fault a safe path, which helps breakers trip and lowers shock risk. It also helps surge protection do its job.

Is grounding the same as bonding?

They are related. Grounding connects the system to the earth. Bonding connects metal parts together so they stay at the same potential.

Where we work

Find your city

Type your city or neighborhood to open the page for help near you.

Start typing, for example a city name or a neighborhood.

    Ready to get the power right?

    Call or text Electrical Illusions, or send the form, and we will set up a visit. Tell us about the house or building and what you need done.

    Visit

    Let's get your power working right.

    Tell us what is happening or what you want added. We read every message and reply with clear next steps and a time for your visit.

    • Your property: where it is, how old the wiring is and what you want done
    • Your city, the job you have in mind, and any result you saved from a tool on this site
    • A visit where we look at your panel and wiring, test what we can and begin a plan around what you want
    Prefer to talk? Call or text800-224-9245

    Your estimate request

    Prefer to type? Text your request. We only use your details to respond to your request.