Skip to content
How it works

How Electrical Illusions Works

Four clear steps from a look at the panel to a tested, labeled system, and what to expect at each one.

An electrician and a homeowner seen from behind looking together at an open electrical panel in a garage
The four steps

Looked at, planned, installed and tested

Whether it is a single outlet or a whole house, the order of work is the same.

  1. 1An electrician and a homeowner seen from behind looking together at an open electrical panel in a garage
    Step 1

    Walk and talk

    We look at the panel and the problem with you, ask how you use the house and listen to what you want it to do.

  2. 2An electrician marking a wiring plan on a tablet beside open wall studs
    Step 2

    Plan the circuits

    Loads are added up, wire and breaker sizes are chosen and the plan is put on paper before any wall is opened.

  3. 3An electrician pulling new cable through wall studs of a room
    Step 3

    Run and install

    Wire is pulled, boxes are set and devices are wired to code, with openings kept small and patched.

  4. 4An electrician testing a wall outlet with a plug-in tester showing green lights
    Step 4

    Test and label

    Every circuit is tested under load, protection is checked and the panel is labeled in plain words.

What to expect

Before, during and after

  • Before the callNote what is happening, when it started and what you would like to add. A photo of the panel helps a lot.
  • At the visitWe look at the panel and the wiring, test what we can and talk through your options in plain words.
  • During the workPower is isolated, the work is done to code and each circuit is tested under load.
  • When we finishThe panel is labeled, openings are patched, the site is cleaned and we walk through the work with you.
Questions

About the process

How soon can someone get back to me?

Call or text 800-224-9245 and we will tell you the earliest time we have.

Do I need to know what is wrong?

No. Tell us what you see, hear or smell, or what you want to add, and we find the cause and explain your choices.

Will the plan change after I say yes?

Plans are discussed in detail first. If we find something hidden, such as old wiring behind a wall, we tell you first and explain the options.

Ready to get the power right?

Call or text Electrical Illusions, or send the form, and we will set up a visit. Tell us about the house or building and what you need done.

Visit

Let's get your power working right.

Tell us what is happening or what you want added. We read every message and reply with clear next steps and a time for your visit.

  • Your property: where it is, how old the wiring is and what you want done
  • Your city, the job you have in mind, and any result you saved from a tool on this site
  • A visit where we look at your panel and wiring, test what we can and begin a plan around what you want
Prefer to talk? Call or text800-224-9245

Your estimate request

Prefer to type? Text your request. We only use your details to respond to your request.