Skip to content
Repairs and Troubleshooting

Flickering Lights Repair

A flicker has many possible causes, from a worn bulb to a loose neutral at the panel. We check them in order, cheapest and simplest first, and stop when the light holds steady.

Flickering Lights Repair by Electrical Illusions
  • ChecksBulb, dimmer, fixture, circuit and service
  • ToolsMeters and load tests
  • FixesDevices, connections and neutrals
  • ResultSteady, quiet light
What you get

What is included

  1. 1Simple causes firstWe check the bulb, the dimmer match and the fixture before opening walls or panels.
  2. 2Connections tightenedLoose splices in boxes and at the panel cause most flicker, and tightening them often ends it.
  3. 3Whole-house flicker taken seriouslyIf every light in the house dims, we test the neutral, the service and the utility side before blaming the lights.
  4. 4Dimmers matched to bulbsLED bulbs need compatible dimmers, and mismatches cause buzzing and flicker we can fix.
How it works

From your first call to the finished job

We do electrical work in cities across the country. Find yours below and set up a visit.

  1. 1You reach outCall, text or send the form with your city and what is happening: what failed, what you smell or see and when it started.
  2. 2We make it safeWe tell you what to shut off, and on arrival we isolate any hazard before we start.
  3. 3We find and fix the causeCircuits are tested, the fault is traced and the repair is made to code and tested under load.
  4. 4We explain what we foundYou hear what failed, what we did and whether anything else is worth watching.
Good fit when

Is this the right choice for your property?

  • Lights that flicker or buzz
  • Dimmers that hum
  • Lights that dim when a big appliance starts
  • Houses where every light pulses
Good to know

What makes a repair last

  • Find the causeA circuit is traced and tested so the fix is aimed at the real problem, not the symptom.
  • Right partsDevices and breakers are matched to the wire and the panel, so nothing is under-rated.
  • Tested under loadA repair is proven with a real load before we call it done.
Questions

Common questions

Why do my new LED bulbs flicker on the dimmer?

Many older dimmers are made for hot filament bulbs. An LED-rated dimmer matched to the bulb usually fixes it.

Is flickering across the whole house dangerous?

It can point to a loose neutral, which can damage equipment. It is worth testing soon, and it may involve the utility's side of the meter.

Where we work

Find your city

Type your city or neighborhood to open the page for help near you.

Start typing, for example a city name or a neighborhood.

    Ready to get the power right?

    Call or text Electrical Illusions, or send the form, and we will set up a visit. Tell us about the house or building and what you need done.

    Visit

    Let's get your power working right.

    Tell us what is happening or what you want added. We read every message and reply with clear next steps and a time for your visit.

    • Your property: where it is, how old the wiring is and what you want done
    • Your city, the job you have in mind, and any result you saved from a tool on this site
    • A visit where we look at your panel and wiring, test what we can and begin a plan around what you want
    Prefer to talk? Call or text800-224-9245

    Your estimate request

    Prefer to type? Text your request. We only use your details to respond to your request.